Replace Drum

Replace Drum

To clear replace Drum message


Reset Brother MFC-L2700dw Drum:
Make sure that the machine is turned on.
Open the front cover.
Press and hold OK for 2 seconds.
Press the Up arrow key or 1 to reset the drum counter.
Close the front cover.

Brother MFC-L2710DW, MFC-L2713DW Drum Reset
Make sure the machine is turned on.
Close the front cover.
Press OK and the Up arrow key at the same time.
Press OK to select Drum.
Press the Up arrow key to reset the drum counter.

Brother DCP-L2550DW Drum Reset
When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps:
Make sure the machine is turned on.
Close the front cover.
Press OK and the Up arrow key at the same time.
Press OK to select Drum.
Press the Up arrow key to reset the drum counter.

    • Related Articles

    • Toner replacement instructions

      For a mfc2700dw: Remove the drum unit and toner cartridge assembly. Press the green tab to eject toner. Take the cover off of the new toner cartridge. Install the new toner cartridge in the drum unit correctly. Reinstall the toner cartridge and drum ...

    • Reset toner

      Brother MFC-L2700DW Toner Counter Reset Make sure your printer is on 1. Press the COPY button (Nothing will work if FAX or SCAN are selected) 2. Open the front cover and leave open while completing the following steps. 3. Display should read “Front ...

    • Chromebook Printer Setup

      Step 1: Connect both devices to the same internet connection Important: Your printer and Chromebook must be connected to the same internet network. Turn on your printer. Connect your printer to the internet network. If you need help, follow your ...

    • Printer says out of paper but it is not

      If printer says its out of paper- *Make sure the paper is flush with the green tab/lever at the back of the tray *Make sure the rollers are clean of all paper debris/dust *If there is paper, ensure not too much paper is loaded into the tray. In some ...

    • If your printer is cutting of parts of the printed page

      Click the windows icon start typing print man click open enter in the LHS credentials click all printers Find your printer listed and right click it. select properties from the drop down menu and you will see this screen. Select preferences. Make ...